
Smart street lights as a sensor network: air quality and LoRa coverage on a campus
A street light is an ideal spot to measure the environment: it has height, power and is everywhere. We explain how we tested a street-light system with sensors and LoRa communication on a university campus in Ourense, and what we learned about its coverage.
A street light has everything an urban measuring point needs: height, electrical power and a presence on every street. That is why INNEBO tested a smart street-light system that, besides lighting, collects environmental data and sends it by radio. Here is a summary of how it works and what we learned by measuring its coverage on a university campus in Ourense.
What it measures and how it sends data
Each measuring point combines temperature, humidity and suspended particle sensors with a microcontroller with an 868 MHz LoRa transmitter. Data travels to a LoRa gateway, is published on an MQTT server and displayed on a Node-RED dashboard, available in real time from any browser or smartphone.


The challenge: knowing how far the signal reaches
LoRa is designed to connect low-power devices over long distances. In free space, theoretical models give ranges of tens or hundreds of kilometres, but a city is not free space: buildings reflect, absorb and block the signal. To plan a network of street lights you need to know where coverage really reaches.
Two ways to measure it
1. Low-cost experimental measurement. The measuring unit sends one packet per second. If the interval between received packets exceeds a threshold, the link is considered lost. Combining this with the smartphone's GPS position while walking around the campus gives a map of covered and uncovered areas.
2. Propagation simulation. The signal is simulated over the city map of the area using a finite-difference time-domain method (O-FDTD), which reproduces the diffraction and scattering of the signal as it interacts with buildings.
What we found
- Coverage depends largely on the layout of the buildings: signal shadows and hot spots appear that an average-range model cannot predict.
- Simulation and experimental measurement agreed on an 84 % spatial overlap of the coverage areas.
- Deviations at the edges were much smaller than with an average-range circle.
- The simulation provides very detailed signal-strength maps that would be almost impossible to obtain from measurements alone.
In practice, this means it is worth planning gateway locations with coverage maps for each area, rather than relying on an average radius.
Next phase
The trial was planned in phases. The next one aimed to study the system's light pollution and its relationship with the photoelectric capacity of the luminaires.
Want to measure environmental or process variables in a plant, an industrial estate or a city? Tell us about your case: we design sensors, communications and data dashboards to measure.